Kamik Portage Shoes Review

Can you believe they sell khaki and gray wading shoes and sandals for fishing?  Why not just a darker color?  I don't want a light colored pair of wading sandals to be seen downstream byt the fish I am stalking.  I bought a pair of Kamik Portage 2 sandals/shoes from Zappos.  Since Cabela's sells Kamik products, I am familiar with the brand.  Kamik products are made in either Canada or the US and come with a lifetime warranty.  I used to wear my green Remington wading boots which I had bought 2 pair which were on sale at Bass Pro Shops ages ago.  They aren't comfortable except when wearing waders.  I was wearing my Adidas Kanadia shoes which were amazingly comfortable and could air dry and not become nasty or mildew.  However, the material in the shoe fell apart because I've had them so long.

The Kamik Portage 2 is amazingly comfortable.  I parked about 1/4 miles down from where I wanted to fish and walked on a sidewalk.  I figured they wouldn't be flexible on the concrete or chafe my feet because they were dry.  To the contrary.  The only issue I had was that rocks entered the shoe and some wouldn't come out simply buy wading in the water or shaking my foot.  I didn't want wading sandals because I didn't want to stub my toes or "portage" the stream and walk down stream and feel thorny vines on my toes or feet and trip because of weeds and such catching between my toes and sandal.  I wanted something to protect my feet in and out of water AND that would last a long time.  They are called portage shoes so that if you do portage a water vessel and carry the canoe or kayak, that your feet would be protected.

The other issue I had was that the cord locks wouldn't hold tight.  One of them came loose pretty quickly. I didn't want to loose a shoe in the mud or come off in swift water.  Who wants to be stuck with one shoe way down stream from his vehicle?  I bought a 4 pack of cord locks from Walmart for .99 and they did very well.  I did have to walk through the brush and brambles and timber and gravel bars left by recent flooding.  That gravel slipped in to the shoe but all I had to do was slip it off and back on.  My Adidas rarely let large rocks in but a lot of gravel.  These shoes do have better grip than my Adidas too.  And overall, I don't have sore heels.  If you want to portect your feet, or you are floating a stream,  I do recommend these portage shoes.

It pays to have a quality fly reel.

I went out on Thursday - mainly I was trying to fit some time in between Olympic hockey games.  Too bad the US lost to Canada again - both men and women.  It was probably a bit too cold for wading - at least water temperatures were almost too bitter.  It was almost 70 degrees which made the frigid water a bit more bearable in shorts and portage shoes.  I didn't feel like squeezing into the waders that used to fit me and have a leak in the crotch that I can't seem to fix - it's in a seam.

I landed several spotted bass on my Shucker pattern (currently listed on ebay -http://www.ebay.com/usr/riverwalker74).  Out of five people, myself and only one other caught fish.  Yes, it was a crummy creek.  One that has a lot of spotted bass but so many folks walking the banks and wading that the fish are very skittish and hard to catch.

And yet, there I was with my new Trout II reel from Allen.  It seems a tad large for my TFO 5 wgt. but balanced well.  I have abstained from spending a lot of money on a rod or reel because I mainly lolligag on streams for bass and panfish.  I don't make long treks for trout and don't pack a travel case with rods for a trip to Canada.  I bought a TFO Signature Series II because all my 5 wgt. rods are medium/heavy action GLoomis rods.  I decided to spend a few bucks on a quality reel.  Why?  1. I have somehow ruined click and pawl reel drags.  2.  I want to be able to send it back for repairs or buy an extra spool to switch out between sink and float lines.  3. Reels made from aluminum cores last longer (at least with my use).  4.  The gears and drag are protected from sand and tiny pebbles.  5.  Allen sent the reel to me with right hand retrieve as requested because there is no way I could do it.  Now that I look at it, I would be afraid to even attempt it.

I have had Lamson, Scientific Anglers, Cortland, Shakespeare, White River and GLoomis reels.  All of them do a good job but let's face it, reels aren't just for holding line.  I just bought an 8 wgt. from Allen Fly Fishing (allenflyfishing.com) and want to match it with their Alhpa III which is a priced at $145.  After thinking about how many times I will be using it compared to the many more times I wade with my 5 wgt., the Cabela's WR3 reel which matches perfectly in weight and color (only $30) will do just fine.

Sometimes, quality does matter - or maybe the right gear can make for a comfortable and enjoyable outing whether the fish are biting or not.

Three Stripe Bass Bug

This is a pattern from the Spring issue of Fly Tyer Magazine.  This is conceived by Jay "Fishy" Fullum.  He has written several books including "Fly Tying with Common Household Materials" - http://www.theanglingbookstore.com/flytyingwithcommonhouseholdmaterials.aspx .  I used to have Fishy's Flies which has simple and easy to understand illustrations and instructions.  I tied the crawfish pattern and tore up the panfish with it.  So, in the spirit of Jay's tying, we will use something other than traditional tying materials - well, it's foam anyways.  The yellow striped bug was tied by @pixrob on Instagram.

The materials call for 3 cylinders of Rainy's Float Foam.  Of which, I only had very large cylinders.  And of course, I justs had to tie this pattern when @pixrob posted it.  I drove to Barnes & Nobles and found that it hadn't come in yet.  I had my friend send me the tying instructions and proceeded to improvise the pattern.

I am using a thicker foam from Hobby Lobby.  You can find some foam materials at Walmart that are thicker than 2 or 3mm foam.  It's a cross.  I do use my foam cutter or just use my scissors to make a meatier body.  I am using Tiemco 8089 size 10 and may even use size 6.

It took me 5 attempts to get this pattern down.  Cut your foam to extend over the bend and up to the eye.

 Use scissors or a razorblade to cust about halfway through the body and from top to bottom.

Make a slit about 3 or 4 mm long.

Cut a long pice of foam about 1 to 1.5mm wide and a bit longer than the bug body.

Tie in your bucktail, kip tail, whatever and then the foam strip.

Slide the foam strip through the slit and tie in the body so that the black stripe is pulled through ahead of the tie-in point.  You may consider exentedin the tail a tiny bit more than I did here.  You'll create body segments at shown.  Other than when tying in the tail end, don't try to make tight wraps.  The hook shank will be resting inside the foam.  I always make 6 wraps of foam on each segment.

Make several half-hitches on the top segment and add eyes.  I spread Zap-a-Gap on the sides and top of the body and add the eyes.  You do not have to put glue on the body but I like how it makes the finished product look.  The fly will become harder though.  I want the stripe to stay in place and the eyes to have a good base.  If you need to apply glue into the bottom gap.  I don't though - not on this pattern though.

After the glue and eyes have dried, add thread in the middle of the largest segment and add legs.

I do try for a longer body - but not too long. Use the magazine photo for reference.

I even use door hangers which can be found at Walmart for $1.

I am very excited to find a new foam pattern that looks great and seems that will be very effective for bass and panfish - more specifically, smallmouth bass!  Let me know if you have any comments and remember - the credit goes to Jay "Fishy" Fullum.

Small streams & different water.

It's been a few months and I've been tying up flies for my smallmouth fly boxes.  As usual, I've loaded them up with terrestrials and heavy flies.  I've got some bluegill patterns tied up too.  The Juicy Foam Fly will be doing a lot of work for me as well as the Seek & Destroy.  I've been tying up some Panfish Charleys for crappie too.

(My copy of the Orvis Cartoon Hopper)

I noticed that there will be a few more accesses to some streams that I like to fish and a few I haven't waded yet.  It makes me excited to go out for panfish on small streams.  It is so relazing to me when I can cast a light rod and catch fiesty bluegills and pumpkinseeds with the occasional bass tugging the line.  I especially enjoy not having to navigate deep or swift water.  Some of these streams are absolutely beautiful.  I also found that while I can no longer go one way, I can go back downstream where the occasional smallmouth bass can be found.

While I've been hitting larger streams, I've been missing out on the smaller creeks and haven't been landing as many panfish as I have in the past.  I have had a lot of success landing smallmouth over the past few years and am ready to chang things up.  My spring location has been virtually halted and I have found another place to try out.

My go-to pond may have recovered from an algae bloom from upstream construction and highway expansion.  Newly placed boulders and large rocks now line what was a muddy bank.  That will provide some new cover and structure for fish.  I just ordered some Boogle Bugs and cannot wait for this winter weater to go away!!

I'm a lot more comfortable just chasing panfish instead of having to land smallmouth bass.  I've finally come to terms that I may actually be a pretty decent fly fisherman and am comfortable just tying on something for bluegills or having a day just for panfish.  I used to get ticked off if I didn't land a bass or have a good spring.  To tell you the truth, I haven't been smallmouth skunked since about 2011.  I've proven myself to my Instagram and Facebook followers - not to mention friends, family and the guys at the fly shop.  So, I feel it's time to relax and enjoy each outing more than I probably would have in the past.

 A crappie fly based off the Panfish Charley.

Jungle Smallmouth Bass - Exotic location??

                                                                                                  Photo - Trout Unlimited HI

Only five natural lakes, all very small, occur in Hawai`i, but 266 freshwater reservoirs ranging up to 400 surface acres in size have been created through impoundment of stream waters. Native fishes are not adapted to these artificial habitats.

Various fish species from elsewhere in the world have been deliberately or accidentally introduced to Hawai`i. High-quality game fishes such as largemouth bass, tucunare and channel catfish are now widespread and well established in reservoir waters. Two game fishes, rainbow trout on Kaua`i and smallmouth bass on O`ahu and Kaua`i, may be found in both streams and reservoirs. Panfish such as bluegill and tilapia are generally abundant in reservoirs statewide, and several tilapia species also occupy stream habitats.

Who knew smallmouth bass could be found in the state of Hawaii?  The past few years, my wife has been pushing for a trip to Hawaii.  Fortunately, I won't have to sit on a plane foever.  We are going to FL for vacation.  However, I am not leaning a bit more towards Hawaii.  That's it I can find my way to this stream.  I did find some directions on how to get to the stream.  First, premission must be given and then it's a tough treck through the jungle.  I have access to some great smallmouth streams but it would be amazing just to land a few smalies and cast amongst the Eucalyptus trees.

It would seem that there are lot of "tubers" on Kaukanahua and access may be easier than the trek in.  I'll leave it up to you to dig up the information on stream access. From reading blogs and looking at videos, the stream seems pretty tough to find an actual public access.